Single Stage Centrifugal Pump / End Suction Pump for Irrigation & Drainage

• Max.Head: 110m-150m
• Max.Capacity: 6-400m3
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Model NO.: IS100-65-250
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Back Pull out
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Circulating Pump, End Suction Pump
• Material: Cast Iron, Ductile Iron, Cast Steel
• Voltage: 380V/415V/440V/460V/3kv/6kv...
• Application1: Clean Water Supply
• Application2: Civil Fire Fighting
• Application3: Irrigation & Drainage
• Application4: Hot Water Transferring
• Application5: Sewage Water Transferring
• Application: Petrochemical Liquid Transferring
• Transport Package: Standard Export Wooden Packing
• Specification: 6-400m3/h
• Trademark: SanChang
• Origin: Changsha, Hunan, China
• HS Code: 8413709990
• Production Capacity: 3000 Per Year

Product Description

Product Description

IS/IR/IY/IH/ZA/ZE series single stage centrifugal pump / end suction pump is used for transferring water or similar liquid without solid particales. The temperature of the liquid usually is 20 C-105 C. The maximum working pressure of the pump is 1.6MPa. This series single stage centrifugal pump / end suction pump is widely used in irrigation & drainage.

Performance range
Capacity Q: 6.3-400m3/h
Head H: 5-125m



Construction
The pump is single -stage single-suction overhanging centrifugal pump. The pump is back pull-out type.
It is unnecessary to disturb the inlet piping, outlet piping and pump casing, the impeller can be dismantled for maintenance.
The shaft seal adopts packing seal or mechanical seal according to customers' requirements.
The pump uses rolling bearings which get lubricated with dilute oil.



Material of flow passage components:
The single stage centrifugal pump / end suction pump could be customized with different material according to different using conditions, main material configuration followed :

Recommended Material Configuration (For reference only)
Item	Clean water	Drink water	Sewage water	Hot water	Sea water
Case & Cover	Gray iron (HT250)	S.S304	Ductile iron (QT500)	Cast Steel	Duplex S.S 2205
Impeller	Gray iron (HT250)	S.S304	Ductile iron (QT500)	2Cr13	Duplex S.S 2205
Wearing ring	Gray iron (HT250)	S.S304	Ductile iron (QT500)	2Cr13	Duplex S.S 2205
Shaft & Sleeve	C.S 45	S.S420	40Cr	40Cr	Duplex S.S 2205
Column Pipe	C.S Q235	C.S Q235	C.S Q235	C.S Q235	Duplex S.S 2205
Remarks: detailed material list will according to liquid and site conditions

Instruction of series single stage centrifugal pump / end suction pump  model
For example IS100-65-250
IS: Single stage centrifugal pump / end suction pump for clean water
IR: Single stage centrifugal pump / end suction pump for hot water
IH: Single stage centrifugal pump / end suction pump for normal chemicals
IY: Single stage centrifugal pump / end suction pump for oil
ZA: Single stage centrifugal pump / end suction pump for chemical under 200^oC
ZE: Single stage centrifugal pump / end suction pump for chemical above 200^oC to 400^oC
100: Inlet diameter (mm).
65: Outlet diameter (mm).
250: Impeller diameter (mm).






Structure
The IS series single stage centrifugal pump / end suction pump overhanded horizontally mounted. The inlet located at the end side of the pump, the outlet located at upside. The pump has the features of compact structure, low noise and space-saving. The shaft seal can be either packing seal or mechanical seal.