Zlb High Pressure Axial Flow Pump
|1-4 5-9 10+|
|FOB Unit Price:||US $5,000 US $4,500 US $4,250|
|Purchase Qty. (Pieces)||FOB Unit Price|
|Transport Package:||Standard Export Wooden Packing|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: ZLB
- Max.Capacity: 8400m3/H
- Impeller Number: Multistage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Verticaljoint Surface Pump
- Impeller: Open
- Trademark: Sanchang Pump
- Origin: Hunan, China
- Max.Head: 110m-150m
- Driving Type: Motor
- Working Pressure: Low Pressure Pump
- Position of Pump Shaft: Vertical Pump
- Mounting Height: Suction Centrifugal
- Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
- Specification: 1*1*1
- HS Code: 8413709990
Model ZLB axial flow pump in pumps of single stage and vertical type,the liquid flows along pump shaft and is delivered at the pump outlet.The head is low and the capacity is large,so ZLB pumps are chiefly used for agricultural irrigation and drainage,also suitable for water circulation in power plant,municipal water supply,water level changing of dock and other water conservancy projects.The pumps can deliver clean water or other liquids with the same physical and chemical properties as water.The application range is excellent.The temperature od liquid pumped should be lower than 50ºC.
Single foundation:Pump and motor are installed in the same foundation with outlet above or under foundation.
Double foundation:Pump and motor is separately installed in itself foundation with outlet between the two foundation
2.Pump shaft is made of high grade carbon steel and is supported by two rubber or plastic bearings with water as a lubricant.
3.In contact with rubber or plastic bearing is the shaft sleeve which is coated with a film of chromium in order to upgrade the anti-corrosive and anti-wearing effect.
4.The capacity and head of the pump can be changed by changing speed or adjusting vane angle according to performance table,if necessary.
5.The axial force of pump is borne by the thrust bearing of motor or the thrust bearing of pump.
Note:Transmission components shall not be open air display,to prevent dust and water vapor into the bearing.
1.Due to the motor and pump constitute an organic whole,no need to Labour,timeconsuming in stallation field,motor,drive mechanism,water pump axis of the assembly process,installation is convenient,fast.
2.Due to run into the water,the pump can greatly simplify the civil and structural engineering,reducing installation area,save the project cost 30~40%.
3.Low noise,no high temperature in the pump installation,improve the operation environment,according to requirements into underground pump station and keep the environmrnt features of the grouond.
4.Diving axial flow pump,motor drive pump is dry fully enclosed diving three-phase asynchronous motor,can run the water for a long time,a traditional unit series of incomparable advantages.
5.Using glass fiber,the high temperature resistant filter materials such as ptfe,P84,can run under the condition of high temperature above 200ºC.
6.Is not sensitive to the charateristics of dust from dust and the influence of the resistant.