• Vertical Centrifugal Industry Use Water Pump
  • Vertical Centrifugal Industry Use Water Pump
  • Vertical Centrifugal Industry Use Water Pump

Vertical Centrifugal Industry Use Water Pump

Max.Head: 150m
Max.Capacity: 8400m3/H
Driving Type: Motor
Impeller Number: Single-Stage Pump
Working Pressure: High Pressure Pump
Influent Type of Impeller: Single Suction Pump
Customization:

Contact Supplier

360° Virtual Tour

Diamond Member Since 2017

Suppliers with verified business licenses

Manufacturer/Factory & Trading Company

Basic Info.

Model NO.
LC
Position of Pump Shaft
Vertical Pump
Pump Casing Combined
Verticaljoint Surface Pump
Mounting Height
Suction Centrifugal
Impeller
Open
Usage
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Material
Ci,Di,CS,Ss,Ds
Voltage
380V/415V/440V/460V/3kv/6kv...
Application
Dewatering
Transport Package
Standard Export Wooden Packing
Specification
3*2*1 meter
Trademark
Sanchang Pump
Origin
Changsha, Hunan
HS Code
8413709990
Production Capacity
5000 Sets Per Year

Product Description

Vertical centrifugal industry use water pump

General :
Type LC
Vertical centrifugal industry use water pump for power station is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid particles (such as iron scrap, sand, coal powder etc.) and industry waste water and seawater with corrosive. The temperature of liquid can not be above 80ºC.
It is widely used in original water works, waste water factory,metallurgy and steel(especially suitable for delivering oxygenation iron sheet water), power station,mine, civil project and farmland etc.

Vertical Centrifugal Industry Use Water Pump

Nomenclature :
  150LC3-90A-L
  150-Outlet diameter of pump is 150mm
  LC-Vertical long-shaft pump
  3- Impeller stage number (No indication, when stage number is 1)
  A-The cut code of impeller
  L-Submerged depth (L≤18m)


Range of performance (Design point) :
  Capacity:  60~8400m3/h.
  Head:       12.5
~94.5m.

Construction feature :
The type LC
Vertical centrifugal industry use water pump is installed with single foundation, its inlet is vertical downward and outlet is horizontal.The pump and the motor is directly connected. The rotation of pump rotor is counter clockwise looking from the motor to the pump, the main features are as following

1.It is fine designed with hydraulic design software. It makes impeller and other wearing parts has a long life because of anti-abrasive impeller and Diffusor. The pump is not only reliable, safe, steady but also saving energy.

2.There is filter in pump inlet with proper hole, this can not only prevent impurity entering pump to damage pump but also decrease inlet loss and increase pump efficiency.

3.Impeller adopts balance hole to balance axial force. There is replaceable seal ring in front and back cover board of impeller to protect impeller and pump.

4.Pump middle shaft, water column and guard pipe are multi-burl,middle shaft uses technology of sleeve coupling.Water pipe can be more or less for different inundated depth according to user's requirement. Impeller and Diffusor are multi-stage for different head.

5.Water pipe is connected by flange with guide bearing in its middle. Pump guide bearing adopts ethene or thordon bearing, it can also adopt rubber ( when the temperature of liquid is over 55ºC
).Shaft is protected by guard column, the guide bearing should be supplied with exterior cooling lubricating water, while delivering sewage.

6.The remaining axial force of pump and the weight of rotor parts is borne by thrust bearing in motor seat or motor with thrust bearing. The thrust bearing is lubricated by dilute oil and cooled with exterior water. The thrust bearing can have element for monitoring temperature.

7.Pump shaft seal adopts packing seal, there is replaceable shaft sleeve in shaft seal and guide bearing to protect shaft, it is convenient to adjust axial location of impeller by nut in bearing parts upper end or pump coupling.

8.Pump can be equipped with controller which can automatically start and stop pump according to liquid level, give an alarm for over loading and control many pumps in long-distance. There is automatic exhaust system for pump with diameter over 500mm.


Material :
Pumped Medium
Material Sort
Part Name
Clear Water Sewage Seawater

 

 

 

 
Bell Mouth HT250 HT250 HT250Ni2Cr ZG00Cr17Ni14Mo2
Impeller HT250 ZG1Cr13Ni1
ZG1Cr18Ni9
ZG00Cr17Ni14Mo2 ZG00Cr17Ni14Mo2
Diffusor HT250 QT500-7 HT250Ni2Cr ZG00Cr17Ni14Mo2
Water Column Q235-A Q235-A HT250Ni2Cr ZG00Cr17Ni14Mo2
Discharge Elbow Q235-A Q235-A HT250Ni2Cr ZG00Cr17Ni14Mo2
Guard Column Q235-A Q235-A 1Cr18Ni9 00Cr17Ni14Mo2
Shaft 452Cr13 452Cr13 1Cr18Ni9 1Cr18Ni9
Shaft Sleeve 2Cr13 2Cr13 1Cr17Ni2 1Cr17Ni2
Guide Bearing Filling in ethene or Thordon
Guide Bearing Body HT250 HT250 HT250Ni2Cr ZG00Cr17Ni14Mo2
Sealing Ring HT250 2Cr13 HT250Ni2Cr ZG00Cr17Ni14Mo2
Adapter Coupling 452Cr13 452Cr13 1Cr17Ni2 1Cr17Ni2
Coupling HT250 HT250 HT250 HT250
Motor Support Q235-A Q235-A Q235-A Q235-A
 
Remarks: Other materials can be used according user's requirement.
Vertical Centrifugal Industry Use Water Pump
Vertical Centrifugal Industry Use Water Pump

 

Send your message to this supplier

*From:
*To:
avatar Mr. Johnson
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now