D6-50X7 High Efficiency Horizontal Multistage Centrifugal Pump for Clean Water

• After-sales Service: 12 Months After Delivery
• Warranty: 12 Months After Delivery
• Max.Head: 1400m
• Max.Capacity: 1360m3/H
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: D6-50*7
• Working Pressure: Middle Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Circulating Pump, Clean Water Pump
• Material: Cast Iron, Cast Steel S.S304 S.S316 Ss2205
• Seal: Packing Seal,Mechanical Seal
• Frequency: 50Hz 60Hz
• Voltage: 380V/400V/415V/440V/6kv/10kv
• Transport Package: Standard Wooden Packing
• Specification: Q=3.75-1360m3/h H=92-1400m
• Trademark: Sanchang Pump
• Origin: Changsha Hunan
• HS Code: 8413709990
• Production Capacity: 200sets Per Year

Product Description

High Efficiency Horizontal Multistage Centrifugal Pump for Clean Water 

Product Description

Horizontal centrifugal multistage pump can be utilised for a wide range of applications in the industrial and marine markets. This multistage pump is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include boiler feed, chemical, energy plants, mining, fire fighting, reverse osmosis, water treatment, pressurisation, dewatering, building systems, marine and cooling/heating conditioning (HVAC), petroleum, irrigation and water supply.

Product Summary

•                     Can pump a wide range of clean low viscosity fluids
•                     18 different flange configurations with the suction and discharge flanges available on the side, on top or on opposing sides.
•                     Maximum fluid temperature of 140°C
•                     Independent pump and motor shafts
•                     Fitted with sacrificial wear rings which are replaced periodically
•                     Available in cast iron, 316 stainless steel, duplex stainless steel, bronze and other materials upon request
•                     Suction flanges conform to EN 1092-2 / PN 16 and the discharge flanges according to EN 1092-2 / PN 40 (PN 63). If required, ANSI/ASME flanges can be supplied.
•                     Gland packing or mechanical seal options available
•                     Single phase and three phase 50hz / 60hz motors. IP55 as standard.
•                     Independent certification is available upon request
•                     Manufactured in accordance with standard BB4 / EN ISO 9905
•                     All impellers are balanced according to ISO 1940 class 6.3
•                     Long coupled with baseplate
•                     Bearings are greased
•                     Can be supplied with an air powered or electric priming pump

Product Parameters

This multistage pump is capable of high pressures up to 55 bar and high flow rates of up to 1000m³/hr and is also very robust due to additional bearings being installed in the pump head, these remove strain away from the motor during operation.

Flow Rate	Up to 1000m³/hr
Head (Pressure)	Up to 550m
Inlet/Outlet Sizes	DN32 to DN250
Operating Temperature	-10°C to +140°C
Drive Options	Electric Motor, Engine

Company Profile

Factory Display: