Centrifufal Pump/Vertical Pump/Chemical Pump
General:
1.The pump and the motor have the same end cover, the axial dimension is shortened, and the structure is simple.
2.The pump body is provided with a pressure-taking hole and a water-draining hole.
3.There is an exhaust valve on the pump body to discharge the air in the pump before working.
4.The bottom of the pump body is provided with a mounting base plate and bolt holes to ensure the stable installation of the whole unit.
Advantages:
1.High efficiency and energy saving,
2.low noise,
3.Reliable performance.
Application:
Applicable to:
1.Energy,
2.Chemical industry,
3.Textile,
4.Papermaking,
5.Hotels,
6.Restaurants and other boilers,
Working Conditions:
Suction pressure≤1.0MPa, or maximum working pressure of pump system≤1.6MPa, ambient temperature <40ºC, relative humidity 0.2.
Main Range of Multistage Horizontal Centrifugal Pump:
Flow:5.6-720m3/h
Head:5-125m
Structures:
1. An insulating cover is installed between the pump body and the upper structure, which is suitable for occasions where the medium temperature T is less than 120 degrees.
2. The combined configuration of the pump and the motor bearing ensures the shaft running accuracy and improves the reliability of the seal.
3. The air cooling device can be installed in the heat insulation cover according to user requirements.
Pictures:
Audited Supplier 
){kind=link}
){kind=link}