Centrifugal Oil Pump for High Temperature

Product Details
Customization: Available
After-sales Service: 12 Months After Delivery
Warranty: 12 Months After Delivery
Still deciding? Get samples of US$ 2500/Piece
Request Sample
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2017

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Year of Establishment
2003-01-06
Registered Capital
7.69 Million USD
  • Centrifugal Oil Pump for High Temperature
  • Centrifugal Oil Pump for High Temperature
  • Centrifugal Oil Pump for High Temperature
Find Similar Products

Basic Info.

Model NO.
AY
Max.Head
330m
Max.Capacity
800m3/H
Driving Type
Motor
Impeller Number
Single-Stage Pump
Working Pressure
Low Pressure Pump
Influent Type of Impeller
Single Suction Pump
Position of Pump Shaft
Horizontal Pump
Pump Casing Combined
Horizontal Split Pumps
Mounting Height
Suction Centrifugal
Impeller
Closed
Usage
Pump, Pumps, Circulating Pump, Oil Pump
Material
Cast Iron, Cast Steel S.S304 S.S316 Ss2205
Seal
Packing Seal,Mechanical Seal
Frequency
50Hz 60Hz
Voltage
380V/400V/415V/440V/6kv/10kv
Transport Package
Standard Wooden Packing
Specification
Q=2.5-800m3/h H=30-330m
Trademark
San Chang
Origin
Changsha Hunan
HS Code
8413709990
Production Capacity
2000sets Per Year

Product Description

Centrifugal Oil Pump for High Temperature

Brief introduction:
AY type oil pump series is improved and redesigned on the basis of the original Y type oil pump series.It is to meet the needs of modernization, as soon as possible to adapt to the energy conservation as the center of the equipment replacement and development of products , with the following characteristics:
1.The bearing body parts replace the original 35, 50, and 60, bearing bodies with 45, 55, and 70 bearing bodies, which improves the reliability.
2.High efficiency and energy saving hydaulic model is adopted in the hydraulic overflow part, which is 5-8 percentage points higher than that of the original Y-type oil pump on average.
3.High degree of universal parts, common standard parts are shared by several series of products.
4.In order to maintain continuity , the structure type, installation size and performance parameter range of AY type oil pump are the same as those of Y type oil pump, so as to facilitate the renewal and transformation of old products.
5.The selection of material, mainly II, Sichuan materials, bearing body parts increased for cast steel, cast iron, for cold areas, open air use, Marine can provide favorable conditions.
6.Bearing air cooling , fan cooling, water cooling three, according to the different use of the pump temperature selection.Fan cooling is especially suitable for water shortage or poor water quality areas.

Application:
1.Transport petroleum.
2.Liquefied petroleum gas and other media without solid particles in petroleum refining.
3.Petrochemical and chemical industrial .

Main Range of Multistage Horizontal  Centrifugal Pump:
Flow:2.5-800m3/h
Head:30-330m
Liquid temperature:-45-420°C

Construction:
AY type oil pump is divided into single stage single suction cantilever type, two stage single suction cantilever type, single stage suction cantiever type , single stage double suction and two stage double suction two support type, two stage single suction two support type and so on six kinds of structure.AY type oil pump housing radial split, especially suitable for conveying high temperature and inflammable, explosive or toxic liquid.

Pumps In Workshop :
Centrifugal Oil Pump for High TemperatureCentrifugal Oil Pump for High TemperatureCentrifugal Oil Pump for High Temperature



Factory Display:
Centrifugal Oil Pump for High TemperatureCentrifugal Oil Pump for High Temperature


 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier