Commonly Used Single Stage Single Suction Cantilever Pump

• After-sales Service: 12 Months After Delivery
• Warranty: 12 Months After Delivery
• Max.Head: 125m
• Max.Capacity: 400m3/H
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Model NO.: IS, IH
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Horizontal Pump
• Pump Casing Combined: Horizontal Split Pumps
• Mounting Height: Suction Centrifugal
• Impeller: Closed
• Usage: Pump, Pumps, Condensate Pump, Circulating Pump
• Material: Cast Iron, Cast Steel S.S304 S.S316 Ss2205
• Seal: Packing Seal,Mechanical Seal
• Voltage: 380V/400V/415V/440V/6kv/10kv
• Frequency: 50Hz 60Hz
• Transport Package: Standard Wooden Packing
• Specification: Stainless Steel
• Trademark: Sanchang Pump
• Origin: Changsha Hunan
• HS Code: 8413709990
• Production Capacity: 2000sets Per Year

Product Description

Commonly Used Single Stage Single Suction Cantilever Pump

Description:
Commonly used single stage single suction cantilever pump specially designed and manufctured by our company  based on the market requirement and introducing from abroad.

IH drainage pump for building through original impeller and modified impeller and cutting.The pump is with full and broad.high efficiency.In the performance scope.According to consumers' needs,may provide pump with any flow and head.

Application :
1.Waterworks
2.Irrigation
3.Daining
4.Pump station
5.Electric power station
6.Air-conditioning circulation water
7.Industrial water supply system 
8.Fire-fighting system
9.General use in oil refinning industry

Type description :
IH50-32-125
50-inlet diameter is 50mm
32-outlet diameter is 32mm
IH - horizontal single stage water pump
125-impeller size. 


Structures:
The main parts of this series of pumps are pump body, impeller, sealing ring, impeller nut, pump cover, sealing parts, intermediate bracket, shaft and suspension, etc. 
Structural features of the pump: the pump cover is fixed on the middle bracket through the lip, and then the pump cover is clamped in the middle through the connection between the pump body and the lip of the middle bracket. The pump body is axial suction, radial discharge, bottom angle support type, and can be directly fixed on the base. The suspension parts are fixed on the intermediate bracket through the spigot, and are supported on the base by the suspension bracket. During maintenance, it is not necessary to disassemble the inlet and outlet connecting pipes, the pump body and the motor, but only need to remove the intermediate connecting piece of the extended coupling, and then the rotor parts can be withdrawn for maintenance. The pump is connected to the motor through an elastic coupling. From the drive end, the pump rotates clockwise.

Pictures:

Factory Display: