Single Stage Double Suction Split Centrifugal Pump for Factory, Mine and Farmland Irrigation
General:
This type of pump has advanced performance, stable operation, safety and reliability. This type of pump is designed in accordance with national standards and specifications, with a high degree of serialization, standardization and generalization. At the same time, new materials and structures are adopted in the design, which can be used for the transportation of various media.
Application:
S-type double suction split pump is used to transport clean water or other liquids with physical and chemical properties similar to water.
Parameter range:
Q:160-18000m3/h
H:10-130m
Structure:Shaft seal:
The S-type single-stage double suction split pump is horizontally installed. The suction inlet and discharge outlet are both below the centerline of the pump shaft and perpendicular to the pump axis. During maintenance, it is not necessary to dismantle the inlet and outlet pipes. The rotor parts can be taken out by taking off the pump cover. The pump is mainly composed of pump body, pump cover, impeller, seal ring, shaft sleeve, bearing and other parts. The pump body and pump cover form an impeller chamber. The axial force of the impeller is symmetrically arranged and balanced through the blades. Bearing: the rotor parts are supported by rolling bearings at both ends of the pump and lubricated with grease. The inlet diameter is greater than 700mm and lubricated with thin oil.
Shaft seal:
1.Packing seal,
2.Mechanical seal.
Pictures:
Factory Display: