End Suction Pump for Conveying Hot Water
General:
End suction pumps are applied to delivery clear water or chemically and physically similar to clear water liquid,with the temperature less than 150 degree.
This series pump is horizontal installation, horizontal suction , vertical discharge, when maintaining , it is not necessary to disassemble the inlet/outlet pipes when take out the rotor parts . the shaft seal way can be packing seal or mechanical seal , according to its usage ,the materials can be common cast iron, anti-abrasive cast steel , cast stainless steel.
Application:
End suction pumps are
widely used in the water supply, the irrigation,it is also suitable for deliverying water or chemically and physically similar to clear water liquid.
Parameter range:
Q:6.3-400m3/h
H:5-125m
Construction:
The main parts of this series pump include pump casing, impeller , seal ring, impeller nut, pump cover,sealing parts , intermediate support,shaft, and hanger bracket etc.
Pump structure features: Pump cover fixed on the middle bracket through the seam allowance.Then connected by the pump body and intermeate support tighen the pump cover in the middle . The pump casing is horizontal suction, axial discharge,bearing type footing.It can directly steady in the base . Hanger part is fixed on the intermediate support through seam allowance .When maintaining,it is no need to disassemble the inlet/outlet coupling pipes,pump body and motor,only need to disassemble the middle coupling parts of the lengthen coupling and then take out the rotor parts.
Samples:
Company information:
Audited Supplier 
){kind=link}
){kind=link}