| Customization: | Available |
|---|---|
| After-sales Service: | 48 Hours |
| Warranty: | Online Service |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Flow Rate | Up to 500 m³/hr |
| Head (Pressure) | Up to 95 m |
| Inlet/Outlet Sizes | DN40 to DN200 |
| Operating Temperature | -10°C to +110°C |
| Drive Options | Electric Motor |
The vertical inline single stage centrifugal pump can be used for a vast range of applications in the industrial and marine markets. It is designed to pump low viscosity clean or slightly contaminated fluids without the presence of solid or fibrous particles. Common fluids pumped include fresh water, sea water and fuels (diesel, petrol and kerosene) and common applications include fuel transfer, irrigation, water supply, water treatment, pressurisation, grey water, dewatering, building systems, marine and cooling/heating conditioning (HVAC).
The vertical centrifugal pump design has many benefits:
The compact vertical centrifugal configuration means the pump can be installed where there are space limitations. The back pull out design allows the motor to be removed while the pump is still connected to the pipework, this in turn allows time saving while the pump is serviced/maintained.
The centrifugal pump and motor have independent shafts, this means that only the pump shaft will need to be replaced in the event of it breaking. Other less robust vertical centrifugal pumps on the market only use the motor shaft, this means that if the shaft breaks, the entire motor needs to be replaced.
A lantern bracket is installed between the pump and motor, this creates a space protecting the motor from fluid ingress in the case of a seal failure.
Wear rings can be installed in the pump head, this is a sacrificial part that wears first protecting the impeller and casing from wear and prolonging the life of these parts and therefore the pump.
The vertical inline centrifugal pump is also available in an ATEXS version for handling flammable fluids or being installed in a non-safe area.
If required, this range can be supplied with an external air powered or electric priming pump for applications where a suction lift is unavoidable.
Product summary
• Can pump a wide range of clean low viscosity or slightly contaminated fluids
• Compact vertical centrifugal design to combat space limitations
• Back pull out design to ensure quick and easy maintenance
• Maximum fluid temperature of 140°C
• Independent pump and motor shafts
• Available in cast iron, 316 stainless steel, duplex stainless steel, bronze and other materials upon request
• Suction and discharge flanges conform to EN 1092-2 / PN 16. Flanges according to EN 1092-1 / PN 16 for steel and stainless steel casings. If required, ANSI/ASME flanges can be supplied.
• Single phase and three phase 50hz / 60hz motors. IP55 as standard.
• ATEXS version upon request
• Independent certification is available upon request
• Casing wear rings to prolong casing and impeller life
• Low NPSH
• Can be supplied with an air powered or electric priming pum
We are a professionalpump manufacturerlocated in XiangtanCity in Hunan, China, founded in 2003,plant areais15000 square meters,169 employees,69 technicianengineers.
Specifying in Multi-stage Centrifugal Pump for morethan 20 years.
Our pump Fields and Applicationsindustrial water supplyand transferring, civil waterworks, high building water supply. waste watertreatment and disposal,power plant cooling system,hot water circulation & boiler feeding,heating networkpipeline, fire fighting system, agricultural irrigation,raw waterintake, flood disposal & emergency drainage.sea water desalination plant, fish farm, shipyard.mining water disposal and petrochemical liquidhandling. etc.
Our Service
1.Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
2.Warranty: 1 year for the pump body, 3 months for the main working parts.
3.Package:According to your quantity, we use plywood case which is durable for ocean transport.
4.Shipping: By Sea and By Air
5.Payment: We are accept T/T,L/C,West Union and so on.
6.Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
7.On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
8.After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need.
){kind=link}