| Customization: | Available |
|---|---|
| After-sales Service: | 48 Hours |
| Warranty: | 12 Months |
|
Still deciding? Get samples of US$ 1000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Horizontal Split Case Double Suction Centrifugal Pump
Brief introduction :
Horizontal split case pump is a type of centrifugal pump that has two single suction impellers or a double suction supported between bearings. The pump casing is split axially with opposing suction and discharge flanges. This allows for easy maintenance on the pump.
Split case pump are typically used to carry low-viscosity liquids such as clear water and unsaturated wastewater from industrial processes at average heads. it can be applied for higher flow rate conditions that are not suitable for end suction pumps, such as fire pumps, portable water distribution, plant make-up water, pipelines, cooling water, and other industrial process flows with fairly thin fluids.
Features
Performance Parameters:
| Pump outlet diameter Dn | 100~900mm |
| Capacity Q | 72~20000m3/h |
| Head H | 7~186m |
| Temperature T | 0~80ºC |
Material of flow passage components:
The S series Split case pump/Split casing pump/Double suction centrifugal pump could be customized with
different material, main material configuration followed :
| Recommended Material Configuration (For reference only) | |||||
| Item | Clean water | Drink water | Sewage water | Hot water | Sea water |
| Case & Cover | Gray iron (HT250) | S.S304 | Ductile iron (QT500) | Cast Steel | Duplex S.S 2205 |
| Impeller | Gray iron (HT250) | S.S304 | Ductile iron (QT500) | 2Cr13 | Duplex S.S 2205 |
| Wearing ring | Gray iron (HT250) | S.S304 | Ductile iron (QT500) | 2Cr13 | Duplex S.S 2205 |
| Shaft | C.S 45 | S.S420 | 40Cr | 40Cr | Duplex S.S 2205 |
| Shaft sleeve | C.S 45 | S.S304 | S.S304 | S.S304 | Duplex S.S 2205 |
| Remarks: detailed material list will according to liquid and site conditions | |||||
Structure Diagram :
|
|
|
| Split Case Centrifugal Pump for Chemical Factory | Split Case Centrifugal Pump for Salt Chemical Factory | Split Case Centrifugal Pump for Cycling Water |
|
|
|
| Multi-stage Split Case Centrifugal Pump for Mine | Multi-stage Centrifugal Pump for Power Plant | Multi-stage Centrifugal Pump for Chemical Factory |
|
|
|
|
|
|
1.Delivery: Delivery time will be on time as the contact. Usually, the delivery time is of centrifugal pump is for 15-25 working days.
2.Warranty: 1 year for the pump body, 3 months for the main working parts.
3.Package:According to your quantity, we use plywood case which is durable for ocean transport.
4.Shipping: By Sea and By Air
5.Payment: We are accept T/T,L/C,West Union and so on.
6.Pre-sales Service:According to your requirement, we will give your our profession advice of pump solution.
7.On-sales Service:We will clearly show you everything in fact when you place an order with us. We will takes photos or videos to show you order production situation.
8.After-sales Service: We will full report you the production progress and plan. Meanwhile, we will follow up the pump working conditions per three months when the pumps put into use, and can send the spare parts to you within one week if you need.
){kind=link}