| Customization: | Available |
|---|---|
| After-sales Service: | 48 Hours |
| Warranty: | 12 Months |
|
Still deciding? Get samples of US$ 3500/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
General:
CZ type standard chemical process pump is a horizontal, single-stage, single-suction chemical centrifugal pump for petroleum. The performance range of the cz chemical process pump includes all the performances of the IH series standard chemical pump, and its efficiency, cavitation performance and other indicators all exceed the IH type pump, and can be interchanged with the IH type pump stand-alone. The characteristic curve is flat, which is suitable for selection when the flow rate changes relatively large. The chemical pump has low cavitation value and high efficiency, and maintains these characteristics even at full load. It is suitable for conveying low temperature or high temperature, neutral or corrosive, clean or containing solid particles, toxic and flammable and explosive media. Mainly used in chemical, petrochemical, steel mills, power plants, paper, food, sugar and other industries.
Features:
1.Low cavitation value,
2. high efficiency.
Application:
Mainly used in :
1.chemical,
2.petrochemical,
3.steel mills,
4.power plants,
5.paper, food,
6.sugar .
Medium:
It is suitable for conveying low temperature or high temperature, neutral or corrosive, clean or containing solid particles, toxic and flammable and explosive media.
Parameter:
Speed: 2960r/min, 1480r/min,
Flow: 2-2000m³/h Head: H≤160m,
Working temperature: -40-- +260ºC,
Working pressure: ≤2.5Mpa,
Direction of rotation: The pump rotates clockwise as seen from the drive end.
Structures:
Standard chemical process pump body: horizontal rear door structure, the pump head and the motor are connected by a coupling, installed on the bottom plate, the impeller is a rear opening type, three bearings, the shaft seal adopts an external mechanical seal, and is equipped with a cooling device , The oil level of the bearing body is observed with an oil mirror; the structure is compact and reasonable. The pump is cast with feet on the pump body, and adopts the foot support structure, which can bear the load from the pipeline and directly transmit it to the foundation, so that the pump rotor will not be bent due to the load of the pump, thus ensuring the bearing and mechanical seal. good service life. During maintenance, it is not necessary to open the pipeline connected to the pump body, just open the bolts of the bracket and the pump body, and separate the two to repair the impeller and the mechanical seal, which is simple and convenient.
Advantages:
1.cz chemical pump and pump are coaxial, with good concentricity, low vibration, low noise and stable operation.
2. Castings and seals of different materials can be used to transport clean water, warm water, hot water and various liquid media.
3. Adopt Y2 and YX3 high-efficiency and energy-saving motors, equipped with domestic high-quality bearings, large starting torque, high efficiency, low vibration, low noise, reliable operation and long service life.
4. Reasonable selection of mechanical seal materials ensures that the pump runs without leakage for a long time and saves more than 50% of operation and management costs.
5. When imported mechanical seals and bearings are used, the product reliability is stronger.
){kind=link}